Recommended LAME

From Hydrogenaudio Knowledgebase

Introduction

This article is meant to explain to the users what are the Hydrogenaudio recommended settings to be used with LAME for highest quality MP3 encoding.

These settings require LAME 3.94 or later. LAME 3.97beta found on this website is the recommended version (check here to download).

Avoid using alpha (a) versions of LAME. More often than not those are exclusively for testing purposes, if you want to help developers with feedback.

Note: At a given bitrate range, the quality scale is following: VBR is higher quality than ABR which is higher quality than CBR (VBR > ABR > CBR in terms of quality). The exception to this is when you choose the highest possible CBR bitrate, which is 320 kbps (-b 320 = --alt-preset insane).


Note: all modes and settings mentioned in this topic belong to the specifications of the MP3 standard, and the resulting MP3s should be played by every standard-conform MP3-Decoder. If this shouldn't be the case, blame the manufacturer or developer of your MP3-Decoder/device.

VBR (Variable bitrate) settings

VBR: variable bitrate mode, the goal is to keep a constant quality and saving bits where possible without lowering the quality.

VBR can be useful to get good quality from a specific quality level. Size is less predictable than with ABR, but the quality is usually better.

-V(number) where number is 0-9, 0 being highest quality, 9 being the lowest.

List of recommended settings
Switch Preset Target Kbit/s Bitrate range kbit/s
-b 320 --preset insane 320 320 CBR
-V 0 --vbr-new --preset fast extreme 245 220...260
-V 0 --preset extreme 245 220...260
-V 1 --vbr-new 225 200...250
-V 1 225 200...250
-V 2 --vbr-new --preset fast standard 190 170...210
-V 2 --preset standard 190 170...210
-V 3 --vbr-new 175 155...195
-V 3 175 155...195
-V 4 --vbr-new --preset fast medium 165 145...185
-V 4 --preset medium 165 145...185
-V 5 --vbr-new 130 110...150
-V 5 130 110...150
-V 6 --vbr-new 115 95...135
-V 6 150 95...135
-V 7 --vbr-new 100 80...120
-V 7 100 80...120
-V 8 --vbr-new 85 65...105
-V 8 85 65...105
-V 9 --vbr-new 65 45...85
-V 9 65 45...85

See also Technical data for recommended LAME settings

If the target is eg. streaming, where you need MP3 in ABR or even CBR mode, there are still the ABR and CBR modes.

ABR (average bitrate) settings

ABR: average bitrate mode varies bits around a specified target bitrate

(128 kbit/s ABR: roughly the same filesize as 128 kbit/s CBR)

  • ABR Setting tuned from 320 kbit/s down to 80 kbit/s
    • --preset <bitrate>

<bitrate> (desired averaged bitrate in kbit/s) can be any value between 8 - 320 , like eg. 9, 17, 80, 128, 133, 200 etc.

Example: --preset 200


CBR (constant bitrate) settings

CBR: constant bitrate mode is not efficient regarding distributing bitrate to more complex music parts and saving bits where it would be possible without lowering the quality of those music parts. Only recommended for usage in streaming situations where the upper bitrate margin must be strictly enforced.

  • CBR Setting tuned from 320 kbit/s down to 80 kbit/s
    • -b <bitrate>

<bitrate> (bitrate in kbit/s) can be only: 8 , 16 , 24 , 32 , 40 , 48 , 64 , 80 , 96 , 112 , 128 , 160 , 192 , 256 or 320.

Remarks

The --vbr-new switch enables the new VBR mode. Lame will encode much faster compared to old/default vbr mode. Current knowledge qualitywise comparing vbr with --vbr-new is, that --vbr-new might even be better qualitywise than the default vbr mode, but there are also reports about artefact, which is worse in --vbr-new compared to default. Though the general impression is, that --vbr-new should be recommended over vbr-default. --vbr-new can be faster and at equal/better quality at same time, because it uses a different algorithm than old/default vbr mode.

Quick Start

Best Quality : 'archiving'

-b 320. This is the strongest setting for MP3, with the lowest risk of artifacts. With the exception of a few situations, quality is rarely better than the highest VBR profiles described below. However, 'archiving' music using a lossy format like MP3 is never recommended-no matter how transparent the resulting files might be. Alternative: Lossless formats like WavPack, FLAC etc. allow true archiving bit for bit like on original CD.

High Quality : HiFi, home or quiet listening

-V3 --vbr-new (~175 kbps), -V2 --vbr-new (~190 kbps), -V1 --vbr-new (~210 kbps) or -V0 --vbr-new (~230 kbps) are recommended. These settings will produce transparent encoding (transparent = most people cannot distinguish the mp3 from the original in an ABX blind test). Audible differences between these presets exist, but are extremely marginal.

Portable : background noise and low bitrate requirement, small sizes

-V6 --vbr-new (~115 kbps), -V5 --vbr-new (~130 kbps) or -V4 --vbr-new (~160 kbps) are recommended for this use. -V6 --vbr-new produces an acceptable quality, while -V4--vbr-new should be close to perceptual transparency.

Very low bitrate, small sizes: eg. for voice, radio, mono encoding etc.

For very low bitrates, up to 100kbps, ABR is most often the best solution.

Use --abr xx (e.g. --abr 80).

Here a trial to get a view, how the perceived listening quality improves with settings/averaged filesize

The revolutionary --alt-preset system introduced in LAME 3.90, is replaced nowadays by the preset system, which is already substituted by the above explained settings -V x system.

You don't need to worry anymore about quality, settings, switches, presets, if you stick to the recommended settings discussed here, everything will be fine and optimized.

If you select nowadays in LAME 3.97 either --alt-preset xy , preset xy or corresponding switch xy, you will always get the same, simply stick to one of the recommended switches of the table or described here in the text.

E.G.: --alt-preset cbr 320 is the exact same thing as --alt-preset insane etc.:

--alt-preset insane = --preset insane = -b 320 = --preset 320 = --preset cbr 320

Setting up EAC for LAME.exe with tagging

Exact Audio Copy guides
Configuration
Compression
Other

Important note

From EAC 1.0 beta 2, the replacement strings changed. For example:

  • "%s" is now "%source%"
  • "%d" is now "%dest%"
  • "%a" is now "%artist%"
  • "%l" is now "%islow%"
  • "%h" is now "%ishigh%"

See the full list in the EAC Placeholders page, the EAC Compression Options guide or in the original EAC FAQ.

Software Needed

Note: This guide has now been amended to reflect changes made to LAME as of 3.98. --vbr-new is now the default setting and is no longer explicitly required. In addition, non-standard genres are now handled more elegantly.

Installation

Note: This guide assumes that EAC has been configured for secure ripping, if not please follow this guide.

  • Unzip the chosen LAME version into the same directory as EAC.
  • If you would like to tag with APEv2 tags please download wapet.zip and unzip it into the same folder.

General Configuration

  • Open EAC and insert a CD into the drive.
  • Click the EAC menu and select Compression Options.
  • Click the External Compression Tab, and put a check box in Use external program for compression.
  • Change Parameter passing scheme to User Defined Encoder (see this thread for reasoning).
  • Change Use file extension to .mp3.
  • Click the Browse button and locate the lame.exe that you unzipped into the EAC directory earlier.

Note: If you want to tag with APEv2 tags using Wapet please locate wapet.exe, not lame.exe.

  • Don't worry which bit rate is shown in the Bit rate drop-down box, as this will not have any effect on the resultant MP3 file unless the %bitrate% placeholder is used (see end of the Advanced Command Line Usage section).
  • Don't worry about the Use CRC check setting; it won't affect the resultant MP3 file either.
  • It's a good idea to tick Check for external programs return code.

Configuring the Additional command line options

  • The green portion in the examples following this section is where you configure the LAME preset.
  • The %source% (formerly %s) and %dest% (formerly %d) in the examples following this section are placeholders for EAC. %source% means source filename and %dest% means destination filename. These are absolutely necessary!

Adding Tags

Note: Always use the [Test Encoder] Button to check your Command Line string. With EAC V1.0 beta 3 if you get a message: "Invalid replacement tag found !" try replacing
each occurence of "%" with "%%" since you need to use double percent so one can be escaped and allow the second one to be passed to Lame.


Let EAC create tags (Recommended)

To have EAC tag your files, tick Add ID3 tag; and in the Additional command line options box, copy and paste the following string: 

-V2 %source% %dest%

Create files with no tags

If you do not wish to have tags, untick Add ID3 tag; and in the Additional command line options box, copy and paste the following string: 

-V2 %source% %dest%

Let Lame create tags

If you prefer to have Lame tag the files based on information shown in the EAC GUI, untick the checkbox next to Add ID3 tag. This is recommended in the article about EAC Compression Options.

Here are some examples providing different tag types:

  • ID3v1 only:
-V2 --id3v1-only --ta "%artist%" --tt "%title%" --tg "%genre%" --tl "%albumtitle%" --ty "%year%" --tn "%tracknr%/%numtracks%" %source% %dest%
  • ID3v2 only :
-V2 --id3v2-only --pad-id3v2 --ta "%artist%" --tt "%title%" --tg "%genre%" --tl "%albumtitle%" --ty "%year%" --tn "%tracknr%/%numtracks%" %source% %dest%
  • ID3v2 only (before EAC version 1.0b2 - for comparison):
-V2 --id3v2-only --pad-id3v2 --ta "%a" --tt "%t" --tg "%m" --tl "%g" --ty "%y" --tn "%n" %s %d
  • ID3v1 and ID3v2:
-V2 --add-id3v2 --pad-id3v2 --ta "%artist%" --tt "%title%" --tg "%genre%" --tl "%albumtitle%" --ty "%year%" --tn "%tracknr%/%numtracks%" %source% %dest%
  • Automatic:
-V2 --ta "%artist%" --tt "%title%" --tg "%genre%" --tl "%albumtitle%" --ty "%year%" --tn "%tracknr%/%numtracks%" %source% %dest%

With Automatic, ID3v1 will always be created. If any ID3v1 field exceeds the length allowed by the ID3v1 specification then a complete ID3v2 tag will also be added.

Use Wapet to create APEv2 tags

If you prefer instead to have APEv2 tags based on information shown in the EAC GUI, untick the checkbox next to Add ID3 tag

Note: Creating APE tags requires wapet.exe. Remember to browse for wapet.exe instead of lame.exe as the external encoding program. Also, lame.exe needs to be in the same directory as wapet.exe.

Use the following string: 

%dest% -t "Artist=%artist%" -t "Title=%title%" -t "Album=%albumtitle%" -t "Year=%year%" -t "Track=%tracknr%/%numtracks%" -t "Genre=%genre%" LAME.exe -V2 %source% %dest%

Advanced Command Line Usage

  • The %islow%...%islow% and '%ishigh%...%ishigh% placeholders are used to add text according to whether the High quality or Low quality radio button is selected, as shown below:
%islow%-V5%islow%%ishigh%-V0%ishigh% %source% %dest%

Therefore, if you select Low quality, EAC will invoke the LAME encoder with the following command line parameters: 

-V5 %source% %dest%

..and if you select High quality EAC will invoke LAME with these command line parameters: 

-V0 %source% %dest%
  • You can access the bitrate value in the drop-down list using the %bitrate% placeholder, for example:
-b%bitrate% %source% %dest%

So, if you selected 192 kBit/s in the Bit Rate drop-down list, the command line would be: 

-b192 %source% %dest%

It is a generally accepted fact that the bitrate selected in the drop-down list doesn't affect the command line. In essence this is true, as it will not affect the command line unless you use the %bitrate% (formerly %r) placeholder. However, the bitrate needs only be set when using ABR or CBR over VBR, which is not recommended for better quality audio.


LAME configured with ID3v1 tagging (and replacement strings used before EAC version 1.0 beta 2)

Additional reading


Credits

Retrieved from "https://wiki.hydrogenaud.io/index.php?title=Recommended_LAME&oldid=8979"