Recommended LAME

From Hydrogenaudio Knowledgebase
Revision as of 14:25, 9 October 2005 by Jan (Talk | contribs)

Jump to: navigation, search

Introduction

This article is meant to explain to the users what are the Hydrogenaudio recommended settings to be used with LAME for highest quality MP3 encoding.

These settings require Lame 3.94 or later. Lame 3.97beta found on this website is the recommended version (Check here to download)

Avoid using alpha (a) versions of LAME. More often than not those are exclusively for testing purposes, if you want to help developers with feedback.

Note: At a given bitrate range, the quality scale is following: VBR is higher quality than ABR which is higher quality than CBR (VBR > ABR > CBR in terms of quality). The exception to this is when you choose the highest possible CBR bitrate, which is 320 kbps (-b 320 = --alt-preset insane).

'VBR:' variable bitrate mode, the goal is to keep a constant quality and saving bits where possible without lowering the quality.

'ABR:' average bitrate mode varies bits around a specified target bitrate

'CBR:' constant bitrate mode is not efficient regarding distributing bitrate to more complex music parts and saving bits where it would be possible without lowering the quality of those music parts. Only recommended for usage in streaming situations where the upper bitrate margin must be strictly enforced.


Note: all modes and settings mentioned in this topic belong to the specifications of the MP3 standard, and the resulting MP3s should be played by every standard-conform MP3-Decoder. If this shouldn't be the case, blame the manufacturer or developer of your MP3-Decoder/device.


VBR (Variable bitrate) settings

  • VBR can be useful to get good quality from a specific quality level. Size is less predictable than with ABR, but the quality is usually better.

-V(number) where number is 0-9, 0 being highest quality, 9 being the lowest.

List of recommended settings
Switch Preset Target Kbit/s Bitrate range kbit/s
-b 320 --preset insane 320CBR 320
-V 0 --vbr-new --preset fast extreme 245 220...260
-V 0 --preset extreme 245 220...260
-V 1 --vbr-new 225 200...250
-V 1 225 200...250
-V 2 --vbr-new --preset fast standard 190 170...210
-V 2 --preset standard 190 170...210
-V 3 --vbr-new 175 155...195
-V 3 175 155...195
-V 4 --vbr-new --preset fast medium 165 145...185
-V 4 --preset medium 165 145...185
-V 5 --vbr-new 130 110...150
-V 5 130 110...150
-V 6 --vbr-new 115 95...135
-V 6 150 95...135
-V 7 --vbr-new 100 80...120
-V 7 100 80...120
-V 8 --vbr-new 85 65...105
-V 8 85 65...105
-V 9 --vbr-new 65 45...85
-V 9 65 45...85

See also Technical data for recommended LAME settings

ABR (average bitrate) settings

(128 kbit/s ABR: roughly the same filesize as 128 kbit/s CBR)

  • ABR Setting tuned from 320 kbit/s down to 80 kbit/s
    • --preset <bitrate>
Example: --preset 200
  • 128 kbit/s ABR
    • -V5 --athaa-sensitivity 1 (when using >= LAME 3.96.1, for best results at 128kbps)
    • --preset 128


CBR (constant bitrate) settings

  • CBR Setting tuned from 320 kbit/s down to 80 kbit/s
    • -b <bitrate>
Example: -b 96
  • 128 kbit/s CBR
    • -b 128
note: --b 320 is the exact same thing as --preset insane
Valid values for CBR encoding are 8, 16, 24, 32, 40, 48, 64, 80, 96, 112, 128, 160, 192, 256 or 320


Additional reading