Difference between revisions of "REACT:Adding Support For TAK"

From Hydrogenaudio Knowledgebase
Jump to: navigation, search
m
m (Minor formatting changes)
Line 37: Line 37:
  
 
===REM ---- Image ----===
 
===REM ---- Image ----===
Add the text below under the comment above, with the other similar lines. As [[TAK]] cannot create tags this section uses '''[[TAK|takc.exe]]''' to encode, and then '''[[Tag_(tagger)|tag.exe]]''' to add [[APEv2]] tags.  You will need to add '''[[TAK|takc.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' to your [[REACT]] '''tools''' directory.
+
Add the text below under the comment above, with the other similar lines.
 +
 
 +
As [[TAK]] does not yet support inline tagging this section uses '''[[TAK|takc.exe]]''' to encode, and then '''[[Tag_(tagger)|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[TAK]] file.  You will need to add '''[[TAK|takc.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' (version 2.0.40 or above) to your [[REACT]] '''tools''' directory.
  
 
  IF NOT @ImageExt@==tak GOTO end_tak_image
 
  IF NOT @ImageExt@==tak GOTO end_tak_image
Line 51: Line 53:
  
 
===REM ---- Tracks ---- ===
 
===REM ---- Tracks ---- ===
This section uses [[ACDIR]] to create [[TAK]] track files. It is complicated by the fact that [[TAK]] cannot use STDIN as input ''or'' tag itselfThis section uses [[ACDIR]] to first split the image [[WAV|WAVE]] into tracks [[WAV|WAVEs]], and then uses [[ACDIR]] again to execute mutiple commands for each track, these being:
+
Add the text below under the comment above, with the other similar lines.
 +
 
 +
This section uses [[ACDIR]] to create [[TAK]] track files. It is complicated by the fact that [[TAK]] does not yet support piping, or inline taggingThe section uses [[ACDIR]] to first split the image [[WAV|WAVE]] into tracks [[WAV|WAVEs]], and then uses [[ACDIR]] again to execute mutiple commands for each track, these being:
  
 
# Create a temporary file.
 
# Create a temporary file.
Line 58: Line 62:
 
# Use [[Tag_(tagger)|tag.exe]] to copy the [[APEv2]] tags from the temporary file to the [[TAK]] file.
 
# Use [[Tag_(tagger)|tag.exe]] to copy the [[APEv2]] tags from the temporary file to the [[TAK]] file.
 
# Delete the temporary file and [[WAV|WAVE]] file.
 
# Delete the temporary file and [[WAV|WAVE]] file.
 
You will need to add '''[[TAK|takc.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' to your [[REACT]] '''tools''' directory.
 
  
 
  IF NOT @Tak@==1 GOTO end_tak_tracks
 
  IF NOT @Tak@==1 GOTO end_tak_tracks
Line 83: Line 85:
  
 
===REM ---- Track ---- ===
 
===REM ---- Track ---- ===
Add the text below under the comment above, with the other similar lines. As [[TAK]] cannot create tags this section uses '''[[TAK|takc.exe]]''' to encode, and then '''[[Tag_(tagger)|tag.exe]]''' to add [[APEv2]] tags.  You will need to add '''[[TAK|takc.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' to your [[REACT]] '''tools''' directory.
+
Add the text below under the comment above, with the other similar lines.
 +
 
 +
As [[TAK]] does not yet support inline tagging this section uses '''[[TAK|takc.exe]]''' to encode, and then '''[[Tag_(tagger)|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[TAK]] file.  You will need to add '''[[TAK|takc.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' (version 2.0.40 or above) to your [[REACT]] '''tools''' directory.
  
 
  IF NOT @Tak@==1 GOTO end_tak_tracks
 
  IF NOT @Tak@==1 GOTO end_tak_tracks

Revision as of 21:23, 2 May 2007

To configure REACT to use an encoder that is not supported with the original INI and CFG files you will need to make changes to both the INI and CFG file you require.

Below you will find additional text that you will need to add to your config files to use TAK with REACT. This is meant as an example, to demonstrate what is required to add any codec that you choose. The naming schemes and meta data used are based on the examples in the initial INI and CFG files; you may want to change them to fit your methodology.

REACT.ini

Settings

Specify that we want to use TAK as our image format.

ImageExt=tak

UserTrackFormats

Specify that we want to encode tracks using TAK.

Tak=1

UserOutputNames

Specify the directories for TAK images and tracks.

ImageDir_Tak=@OutRoot@\TAK-images\$cdartist$
TrackDir_Tak=@OutRoot@\TAK\$cdartist$\[$year$] $album$

UserSettings

Specify any encoding options and the version used.

Opt_Tak=-pN
Ver_Tak=1.0.1


REACT-image.cfg

REM ** Transfer RG values from Wavgain calculations, instead of recalculation.

Add the text below under the comment above, with the other similar lines.

SET RG_Tak=-t "replaygain_album_gain=%album_gain% dB" -t "replaygain_album_peak=%album_peak%"
SET RG_Tak_acdir=-t $qreplaygain_album_gain=%album_gain% dB$q -t $qreplaygain_album_peak=%album_peak%$q

REM ---- Image ----

Add the text below under the comment above, with the other similar lines.

As TAK does not yet support inline tagging this section uses takc.exe to encode, and then tag.exe to add APEv2 tags to the newly-created TAK file. You will need to add takc.exe and tag.exe (version 2.0.40 or above) to your REACT tools directory.

IF NOT @ImageExt@==tak GOTO end_tak_image
	SET dest="@ImageDir_Tak@"
	IF NOT EXIST %dest% MKDIR %dest%
	IF %embed_cover%==1 SET Cover_tag=--picture="|image/jpeg|||@cover@"
	@tools@\takc.exe -e @Opt_Tak@ "@source@" "@image@"
	@tools@\tag.exe %RG_Tak% -t "%ArtistField%=@cdartist@" -t album="@album@" -t totaltracks="@numtracks@" -t year="@year@" -t genre="@genre@" -t comment="@comment@" -t encodedby="%USERNAME%" -t encodersettings="TAK @Ver_Tak@ @Opt_Tak@" -f cuesheet="@cuesheet@" -f eaclog="@eaclog@" "@image@"
	MOVE /Y "@image@" %dest%
	MOVE /Y "@cuesheet@" %dest%
	IF %have_cover%==1 COPY /Y "@cover@" %dest%\"@basename@.jpg"
:end_tak_image

REM ---- Tracks ----

Add the text below under the comment above, with the other similar lines.

This section uses ACDIR to create TAK track files. It is complicated by the fact that TAK does not yet support piping, or inline tagging. The section uses ACDIR to first split the image WAVE into tracks WAVEs, and then uses ACDIR again to execute mutiple commands for each track, these being:

  1. Create a temporary file.
  2. Use tag.exe to add APEv2 tags to the temporary file.
  3. Use takc.exe to encode the track WAVE.
  4. Use tag.exe to copy the APEv2 tags from the temporary file to the TAK file.
  5. Delete the temporary file and WAVE file.
IF NOT @Tak@==1 GOTO end_tak_tracks
	SET dest="@TrackDir_Tak@"
	IF NOT EXIST %dest% MKDIR %dest%
	PUSHD %dest%
		IF @various@==1 SET VA_tag=-t $qalbum artist=@VA@$q
		@tools@\acdir.exe --overwrite --output "%TrackName%.wav" --extract "@sourcecuesheet@"
		@tools@\acdir.exe --exec "ECHO TMP > $q%TrackName%.tmp$q && @tools@\tag.exe --nocheck --ape2 %RG_Tak_acdir% %VA_tag% -t artist=$#a -t album=$#T -t title=$#t -t track=$n/$N -t year=$q@year@$q -t genre=$q@genre@$q -t comment=$q@comment@$q -t encodedby=$q%USERNAME%$q -t encodersettings=$qTAK @Ver_Tak@ @Opt_Tak@$q $q%TrackName%.tmp$q && @tools@\takc.exe -e -overwrite @Opt_Tak@ $q%TrackName%.wav$q $q%TrackName%.tak$q && @tools@\tag.exe --fromfile $q%TrackName%.tmp$q $q%TrackName%.tak$q && DEL $q%TrackName%.tmp$q && DEL $q%TrackName%.wav$q" "@sourcecuesheet@"
		COPY /Y "@eaclog@" "EAClog.txt"
		IF %have_cover%==1 COPY /Y "@cover@" "folder.jpg"
		IF EXIST "@albumfile@.[*].cue" COPY /Y "@albumfile@.[*].cue" .
	POPD
:end_tak_tracks


REACT-track.cfg

REM ============== Begin Main Script ==================

Add the text below under the comment above, with the other similar lines.

SET TrackDir_Tak="@TrackDir_Tak@"

REM ---- Track ----

Add the text below under the comment above, with the other similar lines.

As TAK does not yet support inline tagging this section uses takc.exe to encode, and then tag.exe to add APEv2 tags to the newly-created TAK file. You will need to add takc.exe and tag.exe (version 2.0.40 or above) to your REACT tools directory.

IF NOT @Tak@==1 GOTO end_tak_tracks
	IF NOT EXIST %TrackDir_Tak% MKDIR %TrackDir_Tak%
	PUSHD %TrackDir_Tak%
		IF @various@==1 SET VA_tag=-t "album artist=@VA@"
		ECHO ON
		@tools@\takc.exe -e -overwrite @Opt_Tak@ "@source@" "%TrackName%.tak"
		@tools@\tag.exe %VA_tag% -t artist="@artist@" -t album="@album@" -t track="@track@/@numtracks@" -t title="@title@" -t year="@year@" -t genre="@genre@" -t comment="@comment@" -t encodedby="%USERNAME%" -t encodersettings="TAK @Ver_Tak@ @Opt_Tak@" "%TrackName%.tak"
		@ECHO OFF
		IF %have_cover%==1 IF NOT EXIST folder.jpg COPY "@cover@" folder.jpg
		TITLE @track@/@numtracks@ - "@album@"
	POPD
:end_tak_tracks