Difference between revisions of "Masking"

Revision as of 21:13, 2 September 2006

Masking is based on masking properties of the human ear. In contrast: When you look at the sun and if a bird passes ahead, you do not see it because of the too predominant light of the sun. In audio, it is similar. In the presence of strong sounds, you do not hear the weakest ones. Take for example traffic on a highway. During rush hour construction drilling may limit your ability to a hear an ambulence behind you, hence forth the ambulence is masked or vica versa . Different types of psychoacoustic masking exist and are exploited in most coding systems.

Masking properties

• TMN tone masking noise
• NMT noise masking tone
• TMT tone masking tone

Simultaneous masking

Simultaneous masking is a frequency domain phenomenon, where a low-level signal (noise) commonly referred to as the maskee can be made inaudible by the presenence of a stronger singal masker, (i.e high amplitude pure tone masking a noise). Several of the masking properties listed above are deployed in most coding systems (psychoacoustics models, etc). The masking threshold for each varies depending upon a number of characteristics, which are limited to the SPL and frequency of the masker. In practice high frequency noises are more easily masked.

Temporal masking

Temporal masking is a time domain phenomona by witch masking can be exploited before and after a signal, hence pre-masking and post-masking. The onset of pre-masking is relatively short and doesn't last upwards of 20 msec. In contrast to that of post-masking, which can last upwards of 50-200 msec after the signal that is being masked, usually the Simultanous masker.

Simultanous masker and the corresponding Temporal masking

References

• Masking Effects this applet demonstrates the effects of masking in perceptual coding.
• Human Auditory Masking differences between auditory perception in masking.