REACT:Amending Cuesheet File References

From Hydrogenaudio Knowledgebase
Revision as of 14:47, 16 January 2008 by Synthetic Soul (talk | contribs) (Formatting)

When using REACT to rip to individual tracks you can request all cuesheets to be created, by specifying the following in REACT.ini: 

CreateAllCuesheets=1

This will create the following files in the working directory:

  • "@albumfile@.[s].cue" (Single WAVE file)
  • "@albumfile@.[mg].cue" (Multiple WAVE files with gaps (non-compliant))
  • "@albumfile@.[m].cue" (Multiple WAVE files with gaps left out)
  • "@albumfile@.[mc].cue" (Multiple WAVE files with corrected gaps)


The multi-file cuesheets will reference the tracks using the filename format set in EAC, which should be "$cdartist$ - $album$ - $track$ - $title$" for standard albums, and specifying a ".wav" extension. However, this is unlikely to be the format that your track files are actually in, which means that the cuesheet will need to be amended in order to be useful.

Below, you will find example code for two solutions, using two different tools. You are recommended to use GSAR for this purpose, as certain special characters, e.g.: the ampersand, if used in your filenames, may cause problems when using SED.


Using GSAR

The additional config code below uses the GNU tool GSAR to parse the cuesheet created by EAC, and create a new cuesheet referencing the correctly-named files. This is achieved in the following way:

  1. When the first track is processed the cuesheet will be copied to a new cuesheet file named "$cdartist$ - $album$.cue".
  2. Every time a track is processed a GSAR command, to replace that track's filename, is written to a temporary batch file called "update-cuesheet.bat".
  3. When the last track is processed this batch file is executed, executing a GSAR command for each track.
  4. The file "update-cuesheet.bat" is deleted.


Creating the GSAR commands for each track

The following lines need to be added to the code which is run for the format you are using for each track: 

SET trackCueFile="$cdartist$ - $album$.cue"
IF NOT EXIST %trackCueFile% COPY "@albumfile@.[mg].cue" %trackCueFile%
ECHO @tools@\GSAR.EXE "-s@basename@.wav" "-r%TrackName%.wv" -o %trackCueFile%>>update-cuesheet.bat

Here it is in the WavPack section: 

IF NOT @Wavpack@==1 GOTO end_wavpack_tracks
    IF NOT EXIST %TrackDir_Wavpack% MKDIR %TrackDir_Wavpack%
    PUSHD %TrackDir_Wavpack%
        IF @various@==1 SET VA_tag=-w "album artist=@VA@"
        ECHO ON
        @tools@\wavpack.exe @Opt_Wavpack@ %VA_tag% -w artist="@artist@" -w album="@album@" -w track="@track@/@numtracks@" -w title="@title@" -w year="@year@" -w genre="@genre@" -w comment="@comment@" -w encodedby="%USERNAME%" -w encodersettings="Wavpack @Ver_Wavpack@ @Opt_Wavpack@" "@source@" "%TrackName%.wv"
        @ECHO OFF
        SET trackCueFile="$cdartist$ - $album$.cue"
        IF NOT EXIST %trackCueFile% COPY "@albumfile@.[mg].cue" %trackCueFile%
        ECHO @tools@\GSAR.EXE "-s@basename@.wav" "-r%TrackName%.wv" -o %trackCueFile%>>update-cuesheet.bat
        IF %have_cover%==1 IF NOT EXIST folder.jpg COPY "@cover@" folder.jpg
        TITLE @track@/@numtracks@ - "@album@"
    POPD
:end_wavpack_tracks

Note that the extension ("wv") will need to be changed depending on the format that you are using. Additionally, if you are using MP3, you will need to use the following line instead, which correctly changes the file type to MP3 from WAVE: 

ECHO @tools@\GSAR.EXE "-s@basename@.wav""" WAVE" "-r%TrackName%.mp3""" MP3" -o %trackCueFile%>>update-cuesheet.bat

Also, note that the example uses the "multiple WAVE files with gaps (non-compliant)" cuesheet as its source. This is the cuesheet that most users would require; however you can replace "@albumfile@.[mg].cue" with "@albumfile@.[m].cue" or "@albumfile@.[mc].cue" if you wish.


Executing the batch file

The following lines need to be added to the code which is run for the format you are using at the end of the config: 

CALL update-cuesheet.bat
DEL update-cuesheet.bat

Here they are in the WavPack section: 

IF @Wavpack@==1 (
    PUSHD %TrackDir_Wavpack%
        IF %add_rg%==1 @tools@\wvgain.exe -a *.wv
        REM COPY /Y "@eaclog@" "EAClog.txt"
        CALL update-cuesheet.bat
        DEL update-cuesheet.bat
    POPD
)

These two lines are universal, and can be added to any format's section with no need for change.

Requirements

You will need to download the Windows version of GSAR, and put the executable in your REACT tools directory.


Using SED

The additional config code below uses the GNU tool SED to parse the cuesheet created by EAC, and create a new cuesheet referencing the correctly-named files. This is achieved in the following way:

  1. Every time a track is processed a SED command, to replace that track's filename, is written to a temporary text file called "sedlist.txt".
  2. When the last track is processed this file is passed to SED which executes each command on the cuesheet text, and writes the new text to a new cuesheet file named "$cdartist$ - $album$.cue".
  3. The file "sedlist.txt" is deleted.


Writing the SED commands for each track

The following line needs to be added to the code which is run for the format you are using for each track: 

ECHO s/FILE "@basename@\.wav"/FILE "%TrackName%\.wv"/>>sedlist.txt

Here it is in the WavPack section: 

IF NOT @Wavpack@==1 GOTO end_wavpack_tracks
    IF NOT EXIST %TrackDir_Wavpack% MKDIR %TrackDir_Wavpack%
    PUSHD %TrackDir_Wavpack%
        IF @various@==1 SET VA_tag=-w "album artist=@VA@"
        ECHO ON
        @tools@\wavpack.exe @Opt_Wavpack@ %VA_tag% -w artist="@artist@" -w album="@album@" -w track="@track@/@numtracks@" -w title="@title@" -w year="@year@" -w genre="@genre@" -w comment="@comment@" -w encodedby="%USERNAME%" -w encodersettings="Wavpack @Ver_Wavpack@ @Opt_Wavpack@" "@source@" "%TrackName%.wv"
        ECHO s/FILE "@basename@\.wav"/FILE "%TrackName%\.wv"/>>sedlist.txt
        @ECHO OFF
        IF %have_cover%==1 IF NOT EXIST folder.jpg COPY "@cover@" folder.jpg
        TITLE @track@/@numtracks@ - "@album@"
    POPD
:end_wavpack_tracks

Note that the extension ("wv") will need to be changed depending on the format that you are using. Additionally, if you are using MP3, you will need to use the following line instead, which correctly changes the file type to MP3 from WAVE: 

ECHO s/FILE "@basename@\.wav" WAVE/FILE "%TrackName%\.mp3" MP3/>>sedlist.txt


Executing SED

The following lines need to be added to the code which is run for the format you are using at the end of the config: 

@tools@\SED -f sedlist.txt <"@albumfile@.[mg].cue" >"$cdartist$ - $album$.cue"
DEL sedlist.txt

Here they are in the WavPack section: 

IF @Wavpack@==1 (
    PUSHD %TrackDir_Wavpack%
        IF %add_rg%==1 @tools@\wvgain.exe -a *.wv
        REM COPY /Y "@eaclog@" "EAClog.txt"
        @tools@\SED -f sedlist.txt <"@albumfile@.[mg].cue" >"$cdartist$ - $album$.cue"
        DEL sedlist.txt
    POPD
)

These two lines are universal, and can be added to any format's section with no need for change. Note though, that the example uses the "multiple WAVE files with gaps (non-compliant)" cuesheet as its source. This is the cuesheet that most users would require; however you can replace "@albumfile@.[mg].cue" with "@albumfile@.[m].cue" or "@albumfile@.[mc].cue" if you wish.

Requirements

You will need to download the Windows version of SED, including its dependencies ("libintl3.dll" and "libiconv2.dll"), and put all three files in your REACT tools directory.


Related Thread

This tip is a result of a string of posts between lipidicman and Synthetic Soul in the REACT 2 thread beginning with this post.

Retrieved from "https://wiki.hydrogenaud.io/index.php?title=REACT:Amending_Cuesheet_File_References&oldid=18185"