EAC Drive Options

From Hydrogenaudio Knowledgebase
Revision as of 05:04, 4 February 2014 by Greynol (Talk | contribs)

Jump to: navigation, search

The EAC Drive Options dialog (shortcut: F10) offers several options for configuring how EAC reads and writes audio data from the currently selected drive.

Used EAC version: V0.99 prebeta 5

Extraction Method

Secure Mode

You will need to detect & apply drive features when using secure mode. Even if you chose to use the configuration wizard, it's a good idea to repeat the test a couple of times in order to be sure that the results are consistent (see link). Beware that these features are unique to every drive.

Drive has 'Accurate Stream' feature

Drives without this feature are not capable of addressing audio data down to the exact sample in a consistent way. In order to compensate for this problem, EAC will perform additional synchronization.
  • If the "Detect Read Features..." function reports "Accurate Stream : Yes", it is safe to check the "Drive has 'Accurate Stream' feature" box. This will tell EAC not to perform additional synchronization and provide an increase in speed.

Drive caches audio data

In order for secure mode to work properly, every read request made by EAC must cause the drive to seek data from the CD. If your drive caches audio, subsequent requests for the same data may result in the drive fetching it only from its buffer, rather than from the physical disc. To prevent this from happening, EAC has a routine to ensure previously requested data gets flushed from drive's cache. This is done by having the drive read extra data from the disc; more data than the cache can store.
  • If the "Detect Read Features..." function reports "Caching : Yes", it is important that you enable the cache flushing routine by checking the "Drive caches audio data" box.
  • If the "Detect Read Features..." function reports "Caching : No", it is not necessary to enable the flushing routine. Checking the "Drive caches audio data" box with drives that are reported by EAC as not caching will not improve EAC's accuracy. It won't improve EAC's ability to detect errors nor EAC's ability to correct them. What it will do however, is reduce your ripping speed and shorten the life of your drive.
Tip #1: If you're concerned that your drive caches audio data even though EAC is saying otherwise, try ripping a scratched disc (one known to produce errors easily). Make sure you uncheck the "Drive caches audio data" setting AND uncheck the "Drive is capable of retrieving C2 error information" setting. Make sure you also set the error recovery quality to "Low". If EAC is capable of displaying a read error then cache flushing isn't necessary. Ignore any sync errors that may be displayed; they are irrelevant to this test.
Tip #2: Tip #1 is all you need to know, but if you're still paranoid that your drive caches audio, feel free to try Feurio's audio caching test (Ctrl+Alt+P\Test device\Cache test) or spath's cache explorer. If either determine that your drive doesn't cache or caches less than 64 KB of data, then cache flushing isn't necessary (ignore the reported buffer size when using cache explorer). The reason for the 64 KB barrier is that EAC will never request less than this amount while ripping (link).

Drive is capable of retrieving C2 error information

This setting was designed to speed up the ripping process by relying on the drive to report all uncorrectable errors instead of reading everything twice and comparing the result. Unfortunately not all drives adhere to the same standard as to how this should be done. As a result, errors can go undetected.
EAC has two tests for this feature. The "Detect Read Features..." function only tests if the drive says it can provide C2 error information. The "Examine C2 Feature..." function tests whether the drive can actually report an uncorrectable error. Neither test can be used to determine whether the setting can be used reliably.
  • You may be able to determine if your drive's C2 reporting is reliable in EAC by using DAE Quality. This involves creating a special CD and testing it.
  • Unless you know that you can use this setting reliably, disable it. If you choose to enable it, make sure you also rely on AccurateRip or a test CRC to compare with the read CRC if AccurateRip doesn't have data for your disc.

EAC works well with almost any decent drive available in the market to give you near-perfect results; provided EAC is configured properly as per instructions given above. However, it is always recommended to read some drive reviews at sites like CDRInfo.com or CDFreaks.com and choose a drive with good Digital Audio Extraction (DAE) capabilities.

Paranoid Mode

This is an old mode that has been superseded by secure mode. It is highly unlikely that this mode will provide any benefit over secure mode.

Fast Mode

This is another old mode for drives that cannot provide a synchronized stream when ripping in burst mode. Since synchronization is no longer a problem with modern drives, it is highly unlikely that this mode will provide any benefit over burst mode.

Burst Mode

Burst mode performs extraction without any error checking. It is handy when for discs that do not require re-reading in order to be ripped accurately, especially with drives that cache audio data. It is also handy for discs that trigger re-reading in secure mode but cannot be ripped accurately. When used in conjunction with AccurateRip, or in conjunction with a test CRC to compare with the read CRC in the event that AccurateRip doesn't have data for your disc, burst mode is completely secure.

Drive

Drive read command

(Default: Autodetect read command, Recommended: use the Autodetect read command now button)

This drop-down list allows users to configure which read command to use with the drive to extract audio.


Autodetect read command now

This button will set the proper read command in the Drive read command drop-down list.


"Big Endian" byte order (Motorola)

(Default: disabled)

This option reverses the byte order of the audio data coming from the drive. If the ripped audio is loud static, change this setting.


Swap channels

(Default: disabled)

This setting reverses the stereo channels of the ripped audio. If you find that your drive reverses channels, it is probably due to a two-byte offset which cannot be corrected properly with this option. Try upgrading your drive's firmware or replace it with a different model.


Spin up drive before extraction

(Default: disabled)

This option may or may not improve performance. Enable it if your drive doesn't otherwise operate smoothly or cannot rip the beginning of a track correctly.

Offset/Speed

TBD


Gap Detection

TBD


Writer

TBD


External links