LAME

From Hydrogenaudio Knowledgebase
Revision as of 08:23, 19 November 2006 by HotshotGG (talk | contribs)
LAME
{{{logo}}}
LAME official logo
LAME ain't an MP3 encoder
Developer(s) The LAME project
Release information
Initial release {{{released}}}
Stable release 3.97
Preview release none
Compatibility
Operating system Windows, Mac OS/X, Linux/BSD
Additional information
Use Encoder/Decoder
License LGPL
Website LAME website
Featured article

LAME (Lame Ain't an MP3 Encoder) is the Hydrogenaudio recommended MP3 encoder. It has been developed by the open-source community since 1998, and has become the highest quality MP3 encoder for most purposes.

Some benefits for using LAME:


History

LAME development began around mid-1998. Mike Cheng started it as a patch against the 8hz-MP3 encoder sources. After some quality concerns raised by others, he decided to start from scratch based on the dist10 sources. That branch (a patch against the reference sources) became LAME 2.0, and only on LAME 3.81 they got rid of all dist10 code, making LAME a completely new program-not a mere patch of an existing encoder.

The project quickly became a team effort. Mike Cheng eventually left leadership and started working on tooLAME, an MP2 encoder. Mark Taylor became leader and released version 3.0 featuring gpsycho, a new psychoacoustic model developed by him.

Nowadays LAME is considered the best MP3 encoder at mid-high bitrates and features the best VBR model among MP3 implementations, mostly thanks to the dedicated work of talented developers like Takehiro Tominaga, Naoki Shibata, Darin Morrison, Gabriel Bouvigne, Robert Hegemann, etc. And development is still going on...


Recommended encoder compiles and source code

This list will be kept up to date with the current LAME compiles that are recommended for optimal quality and will keep track of any development compiles released on Hydrogenaudio.

It is suggested that the compiles available here be used with the recommended encoder settings.


The currently recommended LAME version is
3.97

Download the latest LAME from these links:


Recommended encoder settings

This section describes the Hydrogenaudio recommended settings to be used with LAME for highest quality MP3 encoding.

These settings require LAME 3.94 or later. LAME 3.97 is the recommended version.

Quick start (short answer)

Best quality: "archiving"

-b 320. This is the strongest setting for MP3, with the lowest risk of artifacts. With the exception of a few situations, quality is rarely better than the highest VBR profiles described below. However, 'archiving' music using a lossy format like MP3 is never recommended – no matter how transparent the resulting files might be. The alternative is to use Lossless formats like WavPack, FLAC etc. that allow true archiving bit for bit like on original CD.

High quality: HiFi, home or quiet listening

-V3 --vbr-new (~175 kbps), -V2 --vbr-new (~190 kbps), -V1 --vbr-new (~210 kbps) or -V0 --vbr-new (~230 kbps) are recommended. These settings will produce transparent encoding (transparent = most people cannot distinguish the MP3 from the original in an ABX blind test). Audible differences between these presets exist, but are extremely rare.

Portable: background noise and low bitrate requirement, small sizes

-V6 --vbr-new (~115 kbps), -V5 --vbr-new (~130 kbps) or -V4 --vbr-new (~160 kbps) are recommended for this use. -V6 --vbr-new produces an acceptable quality, while -V4--vbr-new should be close to perceptual transparency.

Very low bitrate, small sizes: eg. for voice, radio, mono encoding etc.

For very low bitrates, up to 100kbps, ABR is most often the best solution. Use --abr <bitrate> (e.g. --abr 80).

--preset voice is only available in the command line front-end, and is there for compatibility. It is currently mapped to --abr 56 -mm, so that means that the recommendation would be to encode in mono, and use ABR.

Detailed explanation (long answer)

VBR (variable bitrate) settings

VBR: variable bitrate mode. Use variable bitrate modes when the goal is to achieve a fixed level of quality using the lowest possible bitrate.

VBR is best used to target a specific quality level, instead of a specific bitrate. The final file size of a VBR encode is less predictable than with ABR, but the quality is usually better.

Usage: -V(number) where number is 0-9, 0 being highest quality, 9 being the lowest.

Example: -V2


List of recommended settings
Switch Preset Target Kbit/s Bitrate range kbit/s
-b 320 --preset insane 320 320 CBR
-V 0 --vbr-new --preset fast extreme 245 220...260
-V 0 --preset extreme 245 220...260
-V 1 --vbr-new   225 200...250
-V 1   225 200...250
-V 2 --vbr-new --preset fast standard 190 170...210
-V 2 --preset standard 190 170...210
-V 3 --vbr-new   175 155...195
-V 3   175 155...195
-V 4 --vbr-new --preset fast medium 165 145...185
-V 4 --preset medium 165 145...185
-V 5 --vbr-new   130 110...150
-V 5   130 110...150
-V 6 --vbr-new   115 95...135
-V 6   115 95...135
-V 7 --vbr-new   100 80...120
-V 7   100 80...120
-V 8 --vbr-new   85 65...105
-V 8   85 65...105
-V 9 --vbr-new   65 45...85
-V 9   65 45...85

See also Technical details for recommended LAME settings.

If you need a predictable bitrate (in a streaming application, for example), use ABR or CBR modes, described below.

ABR (average bitrate) settings

ABR: average bitrate mode. A compromise between VBR and CBR modes, ABR encoding varies bits around a specified target bitrate.

Use ABR when you need to know the final size of the file but still want to allow the encoder some flexibility to decide which passages need more bits.

Usage: --preset <bitrate> where <bitrate> (desired averaged bitrate in kbit/s) can be any value between 8 - 320 , like eg. 9, 17, 80, 128, 133, 200 etc.

Example: --preset 200

Important: ABR setting is tuned from 320 kbit/s down to 80 kbit/s.

CBR (constant bitrate) settings

CBR: constant bitrate mode. CBR encoding is not efficient. Whereas VBR and ABR modes can supply more bits to complex music passages and save bits on simpler ones, CBR encodes every frame at the same bitrate.

CBR is only recommended for usage in streaming situations where the upper bitrate must be strictly enforced.

Usage: -b <bitrate> where <bitrate> (bitrate in kbit/s) must be chosen from the following values: 8, 16, 24, 32, 40, 48, 64, 80, 96, 112, 128, 160, 192, 224, 256, or 320.

Example: -b 192

Important: CBR setting is tuned from 320 kbit/s down to 80 kbit/s.

Remarks

  • The rule of thumb when considering encoding options: at a given bitrate, VBR is higher quality than ABR, which is higher quality than CBR (VBR > ABR > CBR in terms of quality). The exception to this is when you choose the highest possible CBR bitrate, which is 320 kbps (-b 320 = --alt-preset insane), but this produces very large filesizes for very little audible benefit.
  • All modes and settings mentioned in this topic belong to the specifications of the MP3 standard, and the resulting MP3s should be playable by every MP3 decoder that conforms with the standard. If your decoder or device does not play MP3s produced by LAME, blame the manufacturer or developer, and not LAME.
  • Avoid using alpha (a) versions of LAME. More often than not those are exclusively for testing purposes. Use them only if you want to help developers with feedback. History of Lame versions & compiles.
  • The --vbr-new switch enables the new VBR mode. Lame will encode much faster than the old/default VBR mode. In terms of quality, --vbr-new appears to be better than the old model, but reports of artifacts when using the new model do exist. Despite these possible issues, --vbr-new is currently recommended over the default VBR mode due to both the speed and quality increases afforded by the new algorithm.
  • -mm : the sound will be encoded in mono. Eg. useful for low bitrates & when stereo is less important.


Here a trial to get a view, how the perceived listening quality improves with settings/averaged filesize


Hey! What happened to "--alt-preset"?

The revolutionary --alt-preset system was introduced in LAME 3.90; it was replaced by the --preset flags in later versions. Starting with version 3.94, the -Vx quality system was introduced, which allows finer control over the desired bitrate; the --preset switches were made into aliases to the corresponding -V flags for the sake of backwards compatibility. There is no difference between the output you get if you use -V2 or --alt-preset standard. (Although adding --vbr-new is recommended for now, see above for details.)

More encoding options are available under the new system, such as -V1, which provides a level of quality between the old "standard" and "extreme" presets, or -V3, which is between the old "medium" and "standard" presets.

LAME 3.97 features more streamlined command line options, and it's recommended to stick to one of the values described in the text or shown in the tables above. You don't need to worry anymore about quality, settings, arcane combinations of switches, or presets.

For example, the following command lines will all produce the same output:

--alt-preset insane = --preset insane = -b 320 = --preset 320 = --preset cbr 320

(--preset cbr 320 is the exact same thing as --alt-preset insane, etc.)


Technical information

The table below contains technical details about the recommended settings.


Technical details of the recommended settings
Switch Preset Target Kbps Y Switch -b Lowpass Resample
-V 0 --preset extreme ~240 128 19383 Hz - 19916 Hz
-V 0 --vbr-new --preset fast extreme ~240 19383 Hz - 19916 Hz
-V 1 ~210 128 18671 Hz - 19205 Hz
-V 1 --vbr-new ~210 18671 Hz - 19205 Hz
-V 2 --preset standard ~190 128 18671 Hz - 19205 Hz
-V 2 --vbr-new --preset fast standard ~190 18671 Hz - 19205 Hz
-V 3 ~175 Y 17960 Hz - 18494 Hz
-V 3 --vbr-new ~175 Y 17960 Hz - 18494 Hz
-V 4 --preset medium ~165 Y 17960 Hz - 18494 Hz
-V 4 --vbr-new --preset fast medium ~165 Y 17960 Hz - 18494 Hz
-V 5 ~130 Y 16538 Hz - 17071 Hz
-V 5 --vbr-new ~130 Y 16538 Hz - 17071 Hz
-V 6 ~115 Y 15826 Hz - 16360 Hz
-V 6 --vbr-new ~115 Y 15826 Hz - 16360 Hz
-V 7 ~100 Y 14581 Hz - 14968 Hz 32000 Hz
-V 7 --vbr-new ~100 Y 14581 Hz - 14968 Hz 32000 Hz
-V 8 ~85 Y 12516 Hz - 12903 Hz 32000 Hz
-V 8 --vbr-new ~85 Y 12516 Hz - 12903 Hz 32000 Hz
-V 9 ~65 Y 9774 Hz - 10065 Hz 24000 Hz
-V 9 --vbr-new ~65 Y 9774 Hz - 10065 Hz 24000 Hz


See also


Notes and references

People who took part in suggesting the different settings:

Dibrom, r3mix, ff123, Hans Heijden, kjempen, Benjamin Lebsanft, GeSomeone, Wombat & GuruBoolez for his immense testing.

Creation of the alt preset system and related special code level quality enhancements:

Dibrom, with technical assistance from Robert Hegemann and Naoki Shibata, Gabriel and extensive tuning help and quality verification via listening tests from JohnV and also initial help (--dm-preset era) from Hans Heijden, ff123, Wombat, and others. Test clips, bitrate information, and further listening tests provided by TheBashar, zbutsam, Pio2001, BadDuDeX, r3mix, h, TarX, Hans Heijden, ff123, Wombat, Filburt, Volcano, Garf, MrDrew, TrNSZ, nyaochi, Amadeus93, in no particular order, and many, many others we (Dibrom, user) probably forgot to mention.

Idea (also exposing the need for a unified preset system), Original post and list of original settings collected by: user

Layout and additional work by: dev0, CiTay, SNYder, Dibrom.

And finally...

Thank you ALL in the community for making it what it is, providing interest and discussion and helping to work towards the most concise, well tuned, and most thought out MP3 quality "paradigm" seen yet! -- Dibrom


Further reading


External links